How To Fix Uneven Stain On Hardwood Floors – 4 Easy Steps

By Mats Hub Team

MatsHub is a place that helps the users to find the best mats, rugs, carpets and doormats for their house or office space.

MatsHub is reader-supported. We may earn a commission through products purchased using links on this page. Learn more about our process here

Hardwood floors go with any style of home decor be it contemporary, traditional, or thematic. It has a natural charm to it that adds natural beauty to space without being very high-maintenance. But over time, you do notice some wear and tear, which requires refinishing.

But this isn’t as easy as it seems. Once you have completed staining the hardwood floor, you might end up noticing variations like random light and dark spots. There could be a few reasons behind these uneven stains.

But if this has happened with your hardwood floor, don’t be disheartened. We will walk you through a step-by-step guide to help you know how to fix uneven stains on hardwood floors.

How To Fix Uneven Stains On Hardwood Floors

Why Did It Happen?

Among the reasons for an uneven stain on hardwood floors is improper application. If sanding of the floor weren’t done properly, it would result in a bumpy surface. That is if you sanded too much or too little. The job is difficult as it is, but wood being an unpredictable material adds to the risk of stains despite a good job.

Materials You’ll Need:

  • Microfiber mop
  • Sprinkler watering can
  • Paint roller
  • Paintbrush
  • Orbital sander

Step 1: Sand The Affected Hardwood

how to fix uneven stain on wood

Now that you have noticed the unsightly stains on your hardwood floor, the first step towards fixing it is to sand the affected area. This is to be done with extreme care and precision to avoid any further damage. Sand with a very light hand to just get the stain evened out and not to remove extra wood.

Always sand parallel to the grain of the wood and not against it. Another thing to note is to start sanding a stain that you have noticed only after it has dried completely. If you fiddle with it before that, there are high chances of you damaging the floor even further.

This way, the stain will seep deeper into the surface of the hardwood, and the new stain can be at the top. Once you are satisfied with the sanding of the floor, move on to wipe the excess wood powder from the surface using a microfiber mop.

Step 2: Stain Again!

how to fix wood stain mistakes

Now, this step is a repeat of what you must have already done with the flooring, except that it is limited to the affected area. You might also choose to skip staining again if you feel the hardwood looks evened out after the sanding job.

Otherwise, apply a small amount of the stain to the uneven surface as swiftly as you can and wipe the excess off with a dry mop. Do not overindulge in staining as you want to match it to the rest of the floor. Always apply the stain across the grain of the hardwood.

Step 3: Give Time To All Steps Involved

Giving adequate time to each step is essential to a good, even hardwood-staining job. Allow the first coat of stain to dry for two days before moving on to the next step. If you still find certain areas to look bumpy despite the fresh coat of stain, go over it with a cloth dampened with acetone. Concentrate on the darker stains and try to blend them into the lighter ones.

If you still feel some imperfections can be removed, you can repeat the above procedure as long as you allow two days of drying time between stain coats. This is crucial for the stain to settle deep into the hardwood.

Step 4: Sealing The Floor

how to blend stain on hardwood floor

Once you are satisfied with an evened-out hardwood floor, this is the last step to ensure it stays that way until the next refinishing! Use a polyurethane sealer to seal the flooring and protect it from potential damage from spills, water, seepage, etc.

Final Thoughts

These tips on how to fix uneven stains on hardwood floors will alleviate your flooring concerns to a great extent. After everything, if you still have doubts about what went wrong or are not satisfied with your fixing job, try consulting a professional.

Leave a Comment